15
Pairing a Replacement Wireless Camera
1
Power on the replacement camera
using the camera power adapter.
NOTE:
This should be done locally
at the NVR to avoid interference
2
With the NVR connected to
a TV/monitor, right click on
your mouse and navigate to
the Main Menu using the
options bar.
By default, each camera within your Wireless NVR kit comes pre-paired to the
Wireless NVR. Additionally, your wireless NVR has its own built-in Wi-Fi for
secure, uninterrupted video transmission and recording. Pairing allows for the
wireless transmission coming from the camera to be detected by the Wireless
NVR. However, if you have a camera that needs to be replaced while under
warranty, the replacement camera will similarly need to be paired to the NVR.
NOTE:
When pairing a Night Owl add-on camera, refer to “Add-on cameras
Quick Setup Guide”.
To pair a replacement camera to your NVR, please use the below steps:
Go to the Camera Menu and
Select the
Add Camera tab
on the left side of the menu.
The top portion of the screen
will list cameras that have
been found but not yet paired.
The bottom portion of the
screen will show all cameras
that are currently paired to
the NVR.
3
A
B
C
A
B
C
QSG-WNVR-V2.indd 16
2017/8/23 10:26
