2
Wireless NVR Rear View
Audio Output – Allows for the connection of an amplified speaker.
VGA Output – Allows for a video connection. If the TV/Monitor does not
have an HDMI input but does have a VGA input, connect the VGA cable
from the VGA output port on the NVR to the VGA input port on your TV/
Monitor. (VGA cable not included)
HDMI Output – Allows for a video connection. If the TV/Monitor has an HDMI
input, connect the HDMI cable from the HDMI output port on the NVR to the
HDMI input port on your TV/Monitor.
RJ-45 (Ethernet) Port – Used to connect the Wireless NVR to your modem/
router for remote viewing. Please note your Wireless NVR comes with built-
in Wi-Fi for the cameras to transmit to the NVR. However, you will need
to manually connect the NVR to your modem/router to remotely view on a
smart device or PC/Mac
®
.
USB Ports – Allow for the connection of a USB mouse and/or a USB flash
drive. Connect the included USB mouse to assist in navigating the NVR’s
menu interface. Connect a USB flash drive to download video files from
the NVR for long term storage or sharing.
Power Input – Used to connect the included 12V DC power supply.
NVR Antenna Mount – for installation of two included NVR antennas.
A
B
C
D
E
F
G
NOTE:
The maximum number of cameras you can connect to your Wireless NVR
will be determined by the number of channels.
AUDIO
OUTPUT
GROUND
VGA
HDMI
LAN
USB
POWER
12V
A
D
C
B
E
F
G
G
Product Overview
QSG-WNVR-V2.indd 3
2017/8/23 10:25
