•
If you selected mode B, you activate the correction as required
-
press the E
-
zoom and picturem button
at the same time. Objective cap must cover objective lens.
Uncover the objective after silent
calibration is finished.
PiP (Picture in Picture)
•
E
nable PIP feature in the menu. Red dot will appear
on the screen.
In reduced image window (PIP) there will be 8x magnified image at
which red dot is aimed
Digital Compass
•
Turn on the digital compass function in the main menu and it will be
displayed it in the middle top of the screen, indicating the current direction.
Motion Sensor
•
Turn on the motion sensor function in the main menu and it will be
displayed on the right side of the screen, showing dip Angle and pitch
Angle. Among them, the horizontal scaleplate represents the dip
Angle, while the vertical
scaleplate represents the pitch Angle.
More
•
Under the option, short press the E
-
zoom button to enter the secondary menu, which contains
the functions of compass calibration, system information, factory resets, return to the main menu,
etc.
Cursor Calibration
(only selected models with laser pointer)
•
When entering the reticle calibration interface, short press the E
-
zoom button to toggle from
all
directions. Short press the image mode button or picture button to adjust the reticle position.
•
When done, long press the E
-
zoom button to save and exit
.
*
This device is not designed to be weapon mounted. Sight mark adjustment is not essential for operation of
Scops
50 MAX II
.
Up-
Down
adjustment
Left-
Right
adjustment
Summary of Contents for Scops 50 MAX II
Page 30: ......
