Using & Adjusting Your Ergo-Learn™
A
D
G
E
H
I
F
B
C
Back Height Adjustment
Turn knob counter-clockwise to
loosen, lift or lower chair back to desired
lumbar position and re-tighten.
Back Angle Adjustment
While seated, pull paddle up, when
desired angle is achieved push paddle
down to lock.
Pneumatic Height Adjustment
To lower, lift paddle while seated.
To raise, lift paddle with your
weight off seat.
Infinite Seat Angle Lock
Lift up to determine seat angle.
To lock seat in desired angle.
push down.
Seat Slider
Pull lever bar up to unlock, move seat to
desired position, release lever to lock
into position.
Forward Tilt
Lean back in chair and roll or pull lever
back for forward tilt, push or roll lever
forward for straight position.
Adjustable Arm Width
To adjust arm width, loosen hand wheel
(do not remove), move arm to desired
position and re-tighten hand wheel.
Back Tension Knob
Turn clockwise to increase tension, turn
counter-clockwise to decrease tension.
Arm Height
Push button up move arm up and down 4”.
