■ HOW TO USE
【Preparation】
１）Insert the Batteries.
２）Attach the Silicone Covers（Can be used without the covers, but please use care to prevent
damage from falling or impact）
【Operation】
１）Check to make sure the pairing numbers match for the Transmitter and Display Units.
If Pairing numbers do not match, they will not communicate.
２）Using the supplied cables, connect the DL-S3 output to the Transmitter input jack.
（When connecting to two DL-S3, connect to A, B inputs. If only using one DL-S3, either channel is OK.）
３）Turn ON the Display Unit.
４）Turn ON the Transmitter.
５）Set the DL-S3 Function Selector Switch （1/2、OUT）to the 1/2 Setting. This configures the LEVELNIC
to output a data signal continuously.
Turn ON the DL-S3.
【※】
Please turn on the Display unit before turning on the Transmitter.
When Transmitter is trying to establish communication it uses more power.
If turned on in reverse order, system will operate without problem, but
battery life will be reduced.
【When done】
１）Turn OFF power in revers order (DL-S3, Transmitter, then Display unit).
■ SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
【
【
【
【 Transmitter
Transmitter
Transmitter
Transmitter 】
】
】
】
Model
：DL-D5-TX
Input
：2x LEVELNIC DL-S3 external signal
（A、B channel）
Connects to DL-S3 w/ included cables
（~ 80cm）
Wireless Protocol
：Bluetooth Class１
Comm. Range
：50～100m
（Line of sight; some variance due to conditions.）
Operating Temp.
：0～40℃
Power
：2x AA Batteries
（Standard rechargeable batteries can also be used.）
Continuous On Time ：Alkaline batteries：~17 hours
（when communicating with Display Unit ）
（If communication can not be established,
~
3 hours.）
Dimensions
：144(L) ×76(W) ×27(D) mm
（incl. Key ring mount）
（With Silicone Cover, 147×81×35mm）
Weight
：~290g
（Including Batteries, Silicone Cover）
Accessories
：Connection Cable ×2
AA Battery ×2
Silicone Cover ×1
■ PRECAUTIONS
PRECAUTIONS
PRECAUTIONS
PRECAUTIONS
For best performance, and to insure a long service life, please read and follow the notes listed below.
● Protect from dropping or impacts. Even when Silicone Covers are attached, the units can be damaged so please handle with care.
● Avoid using in the following environments:
・Dirty, or dusty locations.
・Exposed to direct sunlight.
・Places where chemicals such as acids, alkali, solvents, etc. are present or on surfaces.
・Places contaminated with water or oils.
・Locations where there is high electrical noise, or sparks, such as near welding equipment.
・Locations with high electromagnetic fields, such as near power lines or broadcast radio waves.
● Clean with a dry cloth, and moistened with mild detergent or alcohol as needed. Do not use solvents such as thinners, etc.
● Do not disassemble or modify.
● Remove the batteries if units will not be used for a long time.
NIIGATA SEIKI CO., LTD
NIIGATA SEIKI CO., LTD
NIIGATA SEIKI CO., LTD
NIIGATA SEIKI CO., LTD
6-15-22, Tsukanome, Sanjo-city, Niigata 955-0055 JAPAN
TEL 0256-31-5670 FAX 0256-39-7730
URL http://www.niigataseiki.co.jp
【
【
【
【 Displa
Displa
Displa
Displa y
y
y
y 】
】
】
】
Model
：DL-D5-DISP
Display
：16char.× 2 lines
（Top line for channel A, 2nd line for channel B）
Character size：
4.9×2.5mm
With backlight
Wireless Protocol
：Bluetooth Class１
Comm. Range
：50～100m
（Line of sight; some variance due to conditions.）
Operating Temp.
：0～40℃
Power
：2x AA Batteries
（Standard rechargeable batteries can also be used.）
Continuous On Time ：Alkaline batteries：~8 hours
Dimensions
：144(L) ×76(W) ×27(D)
（incl. Key ring mount）
（With Silicone C over, 147×81×35mm）
Weight
：~290g
（Including Batteries, Silicone Cover）
Accessories
：AA Battery ×2
Silicone Cover ×1
【
Pairing Number
】
（
Set will have matching numbers
）
