-21-
[Transportation Method]
Since this is a precision measuring instrument, be careful not to inflict impact, excessive pressure
or vibration to the device when carrying it or transporting it.
Carrying by human:
To carry the device, put it in the carrying case which was supplied with the device.
Avoid carrying it laid on its side or turned upside down.
As a positioning device to be used in storing the device in the carrying case, the case comes
fitted with a frame that is a little larger than the level base of the device. Put the device in the
frame in such a fashion that its level base will be accommodated snugly inside the frame.
When carrying the device by automobile, etc., place the carrying case flat on a passenger
seat, as far as possible, to protect the device from vibration.
Avoid transporting the case placed in a slant posture or upside down.
Transporting by truck, etc.
For transportation of the device, prepare a sturdy box that is larger than the carrying case by
approximately 20 cm in the internal dimensions of height, width and length.
First, put the device in the carrying case, and then, pack the case in the center of the box
you have prepared using cushioning material for packing (a lump of paper cut into small
pieces by shredder or the like will do), in such a manner that the case will remain afloat in the
middle of the packing material.
The packing box should be properly marked to indicate its upside and downside in order to
prevent the device from being transported in tilted or inverted posture.
Packing box
Cushioning
material for packing
Carrying case
Pack the case isolated from the six sides marked
by approximately 10 cm.
