WARNING
CARE & STORAGE NOTES
●
To prevent electrical shock, always make sure the power is OFF before assembly or
attaching/detaching lens or cleaning the equipment.
●
Never look at sun or bright light through the lens. There is risk of damage to eyesight.
●
Do not expose lens to sunlight or intense light, there is risk of starting fire.
●
Never leave lens in location where it can be exposed to direct or reflected sunlight.
Close the lens cover when not in use in order to prevent starting fire.
●
Keep hands from moving parts on the arm. There is risk of pinching fingers and injury.
CAUTION
●
Handle with Care. Do not drop, scratch, or use strong force with product. (Use special
care when cleaning.) Mishandling may lead to product damage and injury.
●
Do not place the lens in water or rinse with water to clean. Water in long contact with
lens may cause mold or cloudiness.
●
The LED light is capable of frequent on/off cycles, but to avoid wear and damage to the
switch, do not cycle the switch unnecessarily.
●
This product contains metal bearing surfaces and may produce trace amount of dust
and powder due to repeated friction on metal surfaces.
Therefore, it is not suitable for clean-room applications. If there is concern over exposing
workpiece to contamination, do not use for that application or take care not to reposition
light while above workpiece.
●
The clamp may scratch the desk surface and the movement of the light may cause
scratches on the top of the desk. To prevent, place a protective sheet or board between
desk and clamp surface.
●
Do not move the arm or lens housing beyond its limits. If overextended, the light may tilt
and cause damage or accident.
●
Please keep lens clean of dust and fingerprints.
●
Clean lens gently with dedicated lens cloth. Do not wash with abrasive cleaners, or rinse
with water.
●
Keep lens protection cover in down position, and unplug power cord when not in use for
extended period.
■
SPECIFICATIONS
2x Magnification Lens SL-2
Type : White Glass Lens
Magnification : ~2x
Viewable Area : ~
φ
170mm
Head : Polycarbonate
Arm : Steel
~1.8m
Lens cloth
Magnifying
Lens
Material
Cord Length
Accessories
Rated Voltage
Rated Freq.
Rated Power
Light Source
Color Temp.
Efficiency
Weight
Arm Length
AC100V
50/60Hz
15W
84x white LED
~5,000K
（
daylight
）
100lm/W
~3.4
㎏
Upper
：
~425mm, Lower
：
~435mm
LS2-175A
■
Makes work easy - Hands free; Well lit; Wide view.
LED ARM MAGNIFIER
◆
Read and Follow for Safe Use of Product
■
BEFORE USE
Thank you for purchasing the LS2-175A LED Arm Magnifier.
Please read this manual thoroughly before use to insure proper operation and
long service.
Instruction Manual
Niigata seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL intl.sales@niigataseiki.co.jp
URL http://www.niigataseiki.co.jp
■
HOW TO USE
4x Magnification
●
Item No.:SL-4
●
Magnification:~4x
●
Viewable Area:~
φ
140mm
●
For best results, and to prevent
eye fatigue, adjust the Arm so
that the Lens is parallel to the
surface you wish to inspect,
and securely tighten the Clamp.
※
The best lens position will
depend on distance between
eyes and the workpiece.
●
Plug in the cord and turn on the
Power Switch.
※
Position unit so that external
lights, such as the ceiling
fixtures, are not reflected in the
lens.
●
After use, close the Lens Cover,
turn off the Power Switch, and
unplug the Power Cord.
■
Optional
Replacement Lens:
■
PART NAMES, DIMENSIONS
Lens Protective Cover
Arm
Power Plug
Clamp
Clamp Range
：
~10 to 60mm
Arm
Clamp
Lens
Viewable Area:~
φ
170mm
Power Switch
Light Cover
Upper
：
~425mm
Lower
：
~435mm
