Eyepiece
Sleeve
Diopter Adj. Ring
Stage Plate
Objective Lens
Stage Clips
200mm
255mm
①
Rotate the Zoom Control to set for highest
magnification.
②
With right eye, look through the right eyepiece
and adjust the focus using the Focus Knob.
③
Rotate the Zoom Control for lowest
magnification.
④
Using the Right Diopter Adj.Ring, adjust the
focus if required.
⑤
Now rotate the Zoom Control back to highest
magnification and check the focus.
Repeat steps
②
to
④
to achieve the best
focus accuracy.
⑥
Look through the left Eyepiece with the left
eye and adjust focus using the Left Diopter
Adj.Ring similar to steps
①
to
⑤
.
3. Focus Adjustment
・
Diopter Adjustment
①
Place the sample in the center of the Stage
Plate.
②
If required, use Stage Clips to hold sample in
place.
1. Sample Placement
■
OPERATION
■
PART IDENTIFICATION and ASSEMBLY
10
〜
45
×
1
〜
4.5
×（
Zoom Ratio 1
：
4.5
）
ＷＦ
10
×（
20mm Field of View
）
97mm
60
°
Movable Body
Pole Type
ȭ
95mm Black/White Acrylic
±
5Diopter
Optional Ring Light (sold separately)
Mounting diameter
：
ȭ
53mm
Ｌ
255
×Ｗ
200
×Ｈ
25mm
approx.3.6kg
・
Eyecups
…
2
・
Protective Cover
…
1
Magnification
Objective Lens
Eyepiece Lens
Working Distance
Eyepiece Angle
Focus Adjustment
Stand
Stage Plate
Diopter Adj. Range
Illumination
Base Dimensions
Weight
Ａ
ccessories
■
SPECIFICATIONS
●
This is a precision instrument – Handle With Care. Use caution to avoid
shock or excessive forces on instrument when in use or transport.
●
Avoid direct sunlight or areas with high temperatures or high levels of
dust.
Keep in location where temperate and humidity are stable.
●
Keep lens surface clean from dirt and fingerprints.
●
Clean the lens gently with lens cleaning cloth or soft cotton cloth.
●
Do not turn the left and right Zoom Controls in opposite directions; this
will damage the instrument.
●
When not in use store with protective cover, in location that has low isture
in order to prevent internal mold growth.
■
NOTES
Thank you for purchasing the Zoom Stereo Microscope.
Please read this instruction manual thoroughly before use to insure
proper operation and long service.
XZ-45N
ZOOM STEREO MICROSCOPE
INSTRUCTION MANUAL
Base
Head
Head Locking Knob
Zoom Control
27
0
〜
4
4
0
m
m
( R
a
n
g
e
)
25
m
m
32mm
Focus Knob
Ring Light
Mount
（
53mm
）
Niigata seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL intl.sales@niigataseiki.co.jp
URL http://www.niigataseiki.co.jp
Eyecups
2. Eyecup Use
①
Remove the rubber Guard from the Eyepieces.
②
Install the Eyecups as shown.
※
Make sure the
Eyecups are
seated into the
groove on the
Eyepiece.
※
When wearing
eyeglasses,
keep the
Guards in place
and do not install
the Eyecups.
Guard Eyecup
Eyepiece
Groove
R
em
ove
In
st
all
