6
The Nike+ SportBand User’s Guide
Quickstart Guide
LINkING TO A NEW OR CURRENT SENSOR*
1.
5 sec
1.
2.
Nike+
close
v2.0
nikeplus.com
All runs uploaded
Profile
Time & Date
Calibrate
Customize
Help
Factory Reset
RUNS
(UNCALIBRATED)
Choose a Recent Run
WALKS
(UNCALIBRATED)
Choose a Recent Walk
keplus com
NEXT
Calibrate to Improve Accuracy
If you know the true distance of one of your recent
workouts, select the workout below and adjust the distance.
Note: Your run accuracy may be further improved by
calibrating both a run and a walk.
2.
3.
3.
1. Press and hold the
Toggle button (on the
side) for 5 seconds.
1. Complete a run that is
a known distance. (0.5
miles or longer)
2. Walk around to
activate the sensor. If
only one active sensor is
present, a flashing LINk
message will appear. The
linking is complete once
the Ok message has
appeared.
2. Plug the Link back into
your computer, click the
More button in the status
area, and adjust the
calibration tab as
needed.
3. The SportBand can
only link to one new shoe
sensor at a time. If it
detects multiple linked or
unlinked sensors, the
display will show WALk
AWAY. Move away from
all sensors to
successfully link.
3. To calibrate your walk
stride, repeat steps 1
and 2.
*You can link to 7 other sensors.
Visit nikeplus.com/downloads
for video tutorials, complete
product manuals, and other SportBand support.
CALIBRATE fOR ACCURACY
The SportBand measures distance to over a 90 percent degree of accuracy,
right out of the box. You can get even better accuracy by calibrating to your
natural running and walking strides.