![background image](http://html1.mh-extra.com/html/nikkari/mj-26k/mj-26k_instruction-manual_1689296011.webp)
NIKKARI Split Engine MJ-26K, MJ-35K
E3499-0
11
If the blade stops because it is tangled with bands, wires and grasses etc. when
using the attachment of the brush cutter, remove these things after making
sure that the engine is stopped and the blade is completely stopped.
* When the rotating speed of the engine increases, hands or fingers could be severed by
the blade.
Make sure that the blade or cutter is not cracked/damaged or the bolts/nuts are
not loosened after hitting the blade or cutter with something hard.
* Pieces of the blade or cutter may could scatter or blade itself could fly over, causing a
injury to the operator.
Use the shoulder band.
* If this equipment is dropped because of the kickback, the operator's hands or fingers
could be severed by the blade.
When turning around or changing position, the operator should move slowly
so that the blade or cutter should not get contact with people and objects
around.
* Otherwise, it could cause a injury to the person or damage to objects by contact with the
blade or cutter, or the operator could fall down by the kickback of the equipment when
the brush cutter attachment is used.
Concentrate on the work during the grass cutting without standing talking.
When doing the other work out of necessity, stop the engine before performing.
* Unless concentrating on the cutting grass work, the operator could be injured
unexpectedly because the concentration becomes loose.
Do not touch the muffler during or after the operation.
The muffler is hot and it could cause burn injury.
Check if there are empty cans, wires, pebbles, bands etc. or not.
If there are still empty cans, wires, pebbles, bands etc., remove those before operating this
equipment.
* Scattering of the broken pieces of the damaged blade or cutter, may result in injury
accident.
This is a manual downloaded from the web site.
Explanation in the manual which comes together with your purchased product may differ from your product. Use the manual for reference.