Getting Started
English
- 26 -
Switching On/Off
To Switch the TV On
Connect the power cord to the 110-240V AC, 50/60
Hz.
To switch on the TV from standby mode either:
Press the “ ” button,
P+
/
P-
or a numeric button on
the remote control.
Press the side function switch until the TV comes on
from standby.
To Switch the TV Off
Press the “ “ button on the remote control or press
the side function switch until the TV switches into
standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note
: When the TV is switched to standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK.
The First Time Installation (FTI) screen will be
displayed next. Set your preferences using the
navigation buttons and when finished, press OK to
continue.
Note:
M7
(*)
operator type will be defined according to the
Language
and
Country
selections that you made in the
First Time Installation
.
(*)
M7 is a digital satellite service provider.
You can activate
Store mode
option to be available
in “Other settings” menu and your TV’s features will
be illustrated on the top of the screen. A confirmation
screen will be displayed. Select
YES
to proceed.
If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press
OK
button to continue.
Default PIN code can change depending on the
selected country.
If you are asked to enter a PIN code for viewing a
menu option, use one of the following codes:
4725
,
0000
or
1234
.
Aerial Installation
If you select
AERIAL
option from the
Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
NOTE
: You can press
MENU
button to cancel.
After all the available stations are stored, the Channel
List will be displayed on the screen. If you like how the
channels are sorted according to the LCN (*), please
select “Yes” and than press
OK
.
Press
MENU
button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence (if available).
Cable Installation
If you select
CABLE
option and press
OK
button on
the remote control. To continue, please select
YES
and press
OK
. To cancel operation, select NO and
press
OK
. You can select frequency ranges from
this screen.
Enter the frequency range manually by using the
numeric button.
Note
: Searching duration will change depending on the
selected search step.
Satellite Installation
M7(*) channel list installation
Select
Satellite
option from the search type selection
screen. A confirmation message appears. Select
Yes
and press
OK
to continue.
On the next screen select
Automatic channel scan
and press
OK
to start the automatic search. You may
be asked to select
HD
or
SD
channel list according
to your M7 operator type. Select one and press
OK
to proceed.
Wait till the scan is finished. Now the list has been
installed.
To update the M7 channel list
Automatic update for M7 operators is not available.
Press the
MENU
button on the remote and select
Install and Retune
from the main menu. Press
OK
to enter. The first item is named according to the
M7 operator in your country. Highlight and press
OK
button. Then you should follow the same steps
mentioned abow.
If you want to search for satellite channels other than
M7 channels do the followings:
Select
Satellite
option from the search type selection
screen. Select
Yes
on the next screen which asks
about the M7 installation. Select
Manual channel
scan
on the next screen and press
OK
.
Antenna
Type
menu will be displayed.
First Time Installation - USB Connections
