4. OPERATION AND USE
The buttons on the touch screen can be used as regular switches.
For each action performed on the touch screen, you receive
feedback
in the form of a
short beep.
5. TROUBLESHOOTING
If nothing is displayed on the screen or you cannot carry out controls, you have to reset the
touch screen. Interrupt the 12‑15VDC power supply.
6. PRODUCT MAINTENANCE
You can
temporarily deactivate
the touch screen in order to clean it. For this, hold your
finger on 1 of the 4 corners of the screen and press down for 3 seconds. The screen will
be deactivated for 45 seconds. The screen shows the remaining time before the screen
is activated again.
7. TECHNICAL DATA
Dimensions: H 140 x W 226 x D 22,5mm
Weight: approx. 850g
Power supply: 12VDC – 15VDC, 1.5A (min. 20W)
Operating temperature: ‑5 to 45°C
IP class: IP21
8. LEGAL WARNINGS
‑ Read the complete manual before attempting installation and activating the system.
‑ The installation has to be carried out by a qualified person and in compliance with the
statutory regulations.
‑ This user manual has to be handed over to the user. It has to be included in the electrical
installation file and has to be passed on to any new owners. Additional copies are available
on the Niko website or via the support service.
‑ During installation, the following has to be taken into account (not limited to list below):
‑ The statutory laws, standards and regulations;
‑ The state of the art technique at the moment of installation;
‑ This user manual, which must be read within the scope of each specific installation, only
states general regulations;
‑ The rules of proper workmanship
‑ In case of questions, you can consult Niko’s support service or contact a registered control
organisation.
05-09600
EN
22
Summary of Contents for 05-09600
