10-850
55
nv
Niko
sa Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: support@niko.be — www.niko.eu EN
Setting the conversation time
Step
Action
Result
1.
Activate programming mode.
2.
Enter the key combination:
15 XX
✱
where:
- XX = number from 10 to 90 (10 = 0 min, 11 = 1 min, 12 = 2 min,
13 = 3 min …)
1
You have changed the conversation time.
4.
Exit the programming mode.
1
The number 88 indicates an unlimited conversation time.
5.9. Setting the switching time of the actuator output
The output contact of the telephone interface can be set to a short or a long switching time.
Upon delivery, the switching time of the actuator output is set to 10 seconds (XX = 10).
Setting the switching time of the actuator output
Step
Action
Result
1.
Activate programming mode.
2.
Enter the key combination:
17 XX
✱
where:
- XX = number between 10 and 90
(short: 10 = 10 s, 11 = 1 s, 12 = 2 s …)
(long: 20 = 20 s, 21 = 21 s … 90 = 90 s)
You have set the switching time of the actuator output.
3.
Exit the programming mode.
5.10. Activating the actuator output when a call is made
Every time a call is made to a specific telephone, the actuator output can be activated (depending on the telephone address). This way the door can
be automatically opened or the light can be switched on after a call.
Upon delivery, the actuator output is not activated.
Activating the actuator output when a call is made
Step
Action
Result
1.
Activate programming mode.
2.
Enter the key combination:
29 XX YY
✱
where:
- XX = telephone address of the telephone to be called
- YY = switching time
You have activated the actuator output.
3.
Exit the programming mode.
