80
Using Built-In Speedlight
This section explains how to use the built-in Speedlight set to desired
flash sync mode when a D- or G-type AF Nikkor lens is attached.
1
In Auto-Multi Program, Shutter-Priority
Auto, Aperture-Priority Auto or Manual
exposure mode, release the built-in
Speedlight by pressing the
±
flash lock-
release button.
• When the subject is dark or backlit and shutter
release button is lightly pressed, the flash
recommended indication
fi
blinks in the viewfinder
in Auto-Multi Program, Shutter-Priority Auto,
Aperture-Priority Auto or Manual exposure mode.
•
In
a
(AUTO mode) or Vari-Program
, when the
subject is dark or backlit (except in
d
or
g
) and
the shutter release button is lightly pressed,
AUTO
fi
appears in the LCD panel and the built-in
Speedlight automatically pops up.
• When the Speedlight is ready to fire,
fi
appears
without blinking in the viewfinder (when the
camera’s meter is on).
• Press the Speedlight down gently until it clicks into
place to retract it.
Rotating the Command Dial while pressing the
±
button changes the display as
follows.
In
a
or Vari-Program (except
h
):
In
h
(Night Scene mode):
In Auto-Multi Program or Aperture-Priority Auto exposure mode:
In Shutter-Priority Auto or Manual exposure mode:
Speedlight
• In Auto-Multi Program, Shutter-Priority Auto,
Aperture-Priority Auto or Manual exposure mode,
selected flash sync mode remains once it is set. To
change the flash sync mode, rotate the Command
Dial while pressing the
±
button to select another
flash sync mode.
• In
a
(AUTO mode) or Vari-Program, turning the
power switch off or selecting another exposure
mode cancels the selected flash sync mode and
returns to its initial setting (table on page 86).
• In
a
(AUTO mode) or Auto-Multi Program
exposure mode, the camera automatically controls
maximum available aperture according to the film
speed. See page 93.
• Continuous shooting cannot be used in flash
shooting even when
g
(Sports Continuous mode)
is selected.
AUTO
AUTO
SLOW
SLOW
AUTO
AUTO
SLOW
SLOW
REAR
REAR
2
Set the flash sync mode by rotating the
Command Dial while pressing the
±
flash
sync button.
•
Matrix Balanced Fill-Flash
is selected in exposure
modes other than Manual, and
Standard TTL
Flash
is selected for Manual exposure mode. See
page 76 for details.
• See the table on pages 83 and 86 for shutter speed
and aperture, available sync mode in each
exposure mode.
In
P
,
S
,
A
or
M
exposure mode
In
a
or Vari-Program
*
fl
does not appear when the built-in Speedlight
is up.
*
fl
does not appear when the built-in Speedlight
is up.
*
‚
is displayed when
you release your finger
from the
±
button.
*
*
*
81
F65 (E) 02.12.27 5:43 PM Page 80