128
Wi
re
le
ss
Se
rv
ic
es
Wireless LAN Settings for the Camera
To use COOLPIX CONNECT services, network settings including a network
profile and sender information, must be configured for the wireless LAN.
Refer to the information below for assistance in configuring settings using
the [Wireless settings] option in the camera’s setup menu or the Utility on a
computer.
Network Profile
“Network profile” refers to the network settings configured for connection
via a wireless LAN access point that supports Internet connection. To use
COOLPIX CONNECT services, configure the following network settings to
match those used by the desired wireless LAN (access point).
Network name (SSID)
Enter the name of the network (up to 32 characters) to which the access point
belongs. If a name is displayed when configuring a network profile using the
Utility, use that name. If more than one name is displayed, choose the desired
network name.
Authentication
Select an authentication method from [Open system], [Shared key], [WPA-
PSK], or [WPA2-PSK] for verifying connection to the desired wireless LAN.
Encryption
Make your wireless LAN connection more secure by encrypting data. The
encryption method(s) available to the camera differ depending upon the
authentication method selected (see below).
Wireless settings
Network profile
Sender
Address options
Picture Bank
Password
The camera’s setup menu
COOLPIX CONNECT Utility
(mandatory configuration)
Authentication method
Encryption method(s) available to the camera
[Open system]
[None] or [WEP]
[Shared key]
[WEP]
[WPA-PSK]
[TKIP]
[WPA2-PSK]
[AES]
