16
Fi
rst
St
eps
Charging the Battery
Insert the battery and charge it with the AC Adapter EH-64 (supplied) before
first use or when the battery is running low.
1
Connect the power cable and AC adapter
1
.
2
Turn off the camera.
If the power-on lamp (green) is lit, press the power
switch to turn off the camera.
You cannot charge
the battery while the camera is turned on.
3
Connect the AC adapter to the camera’s multi connector
2
.
The multi connector should be fully inserted.
4
Plug the power cable into an outlet
3
.
The AC adapter power-on lamp will light
4
.
k
Charging the Battery After Setting the Camera’s Clock
When the camera’s built-in clock has not been set, the battery begins charging when
the AC adapter is connected. Once the clock is set, Picture Bank (
150) will start when
the AC adapter is connected, and the camera will attempt to upload pictures to a dedi-
cated Picture Bank server. Press
d
to cancel picture upload and charge the battery. Pic-
ture Bank can be set so that it does not start automatically when the AC adapter is
connected (
151).
5
The battery begins charging.
The power-on lamp next to the power switch will
blink orange as the battery charges. If the lamp flick-
ers rapidly, the AC adapter is not correctly inserted or
the battery is faulty. Reinsert the AC adapter or
replace the battery.
A fully exhausted battery will recharge in about two hours.
1
2
4
3
