16
Firs
t St
ep
s
Setting Display Language, Date, and Time
A language-selection dialog is displayed the first time the camera is turned
on.
1
Press the power switch to turn on the
camera.
The power-on lamp will light and the monitor will
turn on.
2
Use the rotary multi selector to choose
the desired language and press
d
.
For information on using the rotary multi selector, see
“The Rotary Multi Selector” (
3
Choose [Yes] and press
d
.
If [No] is selected, the date and time will not be set.
4
Press
d
.
The home time zone menu is displayed.
l
Daylight Saving Time
If daylight saving time is in effect, turn on [Daylight saving]
in the time zone menu and set the date.
1
Before pressing
d
, press the rotary multi selector
H
to
choose [Daylight saving].
2
Press
d
to enable daylight saving time (
y
).
Pressing
d
toggles the daylight saving time option on
and off.
3
Press the rotary multi selector
G
, and then press
d
to
proceed to step 5.
When daylight saving time ends, turn [Daylight saving] off
from the date menu (
101) in the setup menu. The cam-
era’s clock is automatically set back one hour.
Date
Set time and date?
No
Yes
X
Time zone
London,Casablanca
Daylight saving
