71
Connecting to a Computer
C
onnecting
to
Te
le
visi
ons,
Co
mput
ers,
and Pri
nters
Transferring Pictures to a Computer
1
Start a computer to which PictureProject has been installed.
2
Turn off the camera.
3
Connect the camera to the computer using the supplied USB
cable.
4
Turn on the camera.
At default PictureProject settings, PictureProject
Transfer is launched immediately with recognition of
camera connection.
5
Transfer pictures.
Transfer using PictureProject
Click [Transfer] in PictureProject Transfer.
All pictures and movies marked for transfer are copied to the computer. Once
transfer is complete, pictures are displayed in PictureProject.
Transfer using
d
(
E
) on the camera
While PictureProject Transfer is launched, press
d
(
E
) to copy pictures marked
for transfer (
72) to the computer. The following messages are displayed in the
camera monitor during transfer.
I
Preparing to transfer.
I
Transferring images to
computer.
K
Transfer completed.
