86
Basic Camera Setup: The Setup Menu
Shoot
ing,
Pl
a
y
b
a
ck and Setup
Menus
k
Auto Off
To reduce the drain on the batteries, the monitor turns off and the camera enters
standby mode (
13), if no operations are performed for a certain period of time.
The power-on lamp flashes in standby mode. If no operations are performed for
another three minutes, the camera turns off automatically.
Use this option to set time before camera enters standby mode.
C
Notes on Auto Off
The time allowed to elapse before the camera enters standby mode is fixed in the following cases:
•
While menus are displayed: 3 minutes
•
While slide show is automatically repeated or AC adapter is connected: 30 minutes
Auto off
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from [30s] (default setting), [1m], [5m], and [30m].
Sleep Mode
If [On] (default setting) is selected, the camera will enter standby mode when there
is no change in the brightness of the subject, even before the time selected in the
auto off menu has elapsed.
•
The camera will enter sleep mode after 30 seconds when [Auto off] is set to [1m],
or after 1 minute when [Auto off] is set to [5m] or more.
•
If no operations are performed for fifteen seconds when the auto off is set to [30s]
and power saving (
91) is [On] (default setting), the monitor turns off and the
power-on lamp blinks. If no operations are performed for another fifteen seconds,
the camera enters standby mode.