14
First Ste
p
s
First Steps
Inserting Batteries
1
Open the battery-chamber/memory card slot
cover.
Hold the camera upside down to prevent the batteries
from falling out.
2
Insert the batteries.
Insert the batteries correctly as shown at right.
3
Close the battery-chamber/memory card slot
cover.
Supported Batteries
This camera uses the following batteries.
•
Two LR6 alkaline (AA-size) batteries (supplied)
•
Two ZR6 oxyride (AA-size) batteries (available separately)
•
Two FR6 lithium (AA-size) batteries (available separately)
•
Two EN-MH1 Rechargeable Ni-MH Batteries (available separately from Nikon)
Turning On and Off the Camera
To turn on the camera, press the power switch. The
power-on lamp (green) will light for a moment and the
monitor will turn on.
To turn off the camera, press the power switch again.
When the camera is turned off, both the power-on lamp
and monitor will turn off.
•
If the camera is turned off, hold down
c
to turn the
camera on in playback mode (
3
2
1
2
1