138
Techn
ic
a
l Not
e
s
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
Problem
Solution
A
O
(blinks)
Clock not set.
Set clock.
117
B
Battery running low.
Prepare to charge or
change battery.
12
N
Battery exhausted.
Battery exhausted.
Charge or change battery.
12
P
Battery temperature
high
Battery temperature is
high.
Turn off camera, and allow
battery to cool down
before resuming use. After
5 seconds, this message
will disappear, the monitor
will turn off, and the
power-on lamp and flash
lamp will blink rapidly.
After the lamps blink for 3
minutes, the camera will
turn off automatically, but
you can also press the
power switch to turn it off
manually.
15
Q
(
●
blinks red)
Camera cannot focus.
•
Refocus.
•
Use focus lock.
24, 25
104
P
Please wait for the
camera to finish
recording.
Camera cannot perform
other operations until
recording is complete.
Wait until message clears
from display automatically
when recording is
complete.
25
N
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect switch
to “write” position.
19
P
This card cannot be
used.
Error accessing memory
card.
•
Use approved card.
•
Check that connectors
are clean.
•
Confirm that memory
card is correctly inserted.
132
18
18
P
This card cannot be
read.
