129
Connecting to a Computer
Con
n
e
cti
ng t
o
Te
le
vi
sion
s, C
o
mputers and
Pri
n
ters
5
Confirm that the source device is displayed in the transfer options
Source
panel and click
Start Transfer
.
At the Nikon Transfer default settings, all pictures are transferred to the computer.
At the Nikon Transfer default settings, ViewNX starts automatically when transfer is
complete and transferred pictures can be viewed.
For more information on using Nikon Transfer or ViewNX, refer to help information
contained in Nikon Transfer or ViewNX (
A
130).
Disconnecting the camera
Do not turn off the camera or disconnect the camera from the computer during
transfer.
When transfer is complete, open and close the slide cover to turn off the camera
and disconnect the USB cable.
The camera turns off automatically if there is no communication with the
computer for 30 minutes while the camera is connected via the USB cable.
B
Connecting the USB Cable
•
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle,
and do not use force when connecting or disconnecting the USB cable.
•
The connection may not be recognized if the camera is connected to a computer via a USB hub.
Start Transfer
button
Source device