147
Basic Camera Setup: The Setup Menu
Se
tu
p
M
e
n
u
Vibration Reduction
Select the vibration reduction option for shooting.
Vibration reduction effectively reduces blur, caused by slight hand movement
known as camera shake, which commonly occurs when shooting with zoom
applied or at slow shutter speeds. The effects of camera shake are reduced when
recording movies, in addition to when taking still pictures.
Set
Vibration reduction
to
Off
when using a tripod to stabilize the camera
during shooting.
The current vibration reduction setting can be confirmed in the camera monitor
with shooting when photo information is on (
A
11, 27). When
Off
is selected, no
icon is displayed.
B
Notes on Vibration Reduction
•
Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the image of the monitor stabilizes before
shooting.
•
Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may be displayed blurry.
•
Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
•
Image processing with electronic vibration reduction may not perform as expected with very
slight or extreme camera shake, even when
On (hybrid)
is selected.
•
Image processing with electronic vibration reduction is not enabled at fast or extremely slow
shutter speeds, even when
On (hybrid)
is selected.
•
The
On (hybrid)
option for
Vibration reduction
and
Date imprint
(
A
74, 146) cannot be
enabled simultaneously. When shooting with
Vibration reduction
set to
On (hybrid)
,
Date
imprint
is automatically set to
Off
.
•
When
On (hybrid)
is selected and electronic vibration reduction is activated, the shutter is
automatically released twice when a picture is taken to allow for image processing. Therefore, the
time required to record pictures increases.
Shutter sound
(
A
149) can be heard only when the
shutter is released the first time and a single picture will be recorded.
Tap
B
M
Setup menu (
A
140)
M
Vibration reduction
On (hybrid)
The effects of camera shake are reduced optically only using a lens-shift method.
Additional image processing with electronic vibration reduction is applied to
further reduce the effects of camera shake with recording of still pictures taken
under the following conditions.
• when flash is disabled.
• when a shutter speed slower than 1/60 seconds is used.
• when
n
Self-timer
is disabled.
• when
U
Single
is selected for the
C
Continuous
setting.
• when ISO sensitivity is set to 200 or less.
On (default setting)
Vibration reduction is enabled when taking pictures and recording movies using
lens-shift method.
Off
Vibration reduction is not enabled.
