166
T
e
ch
n
ical
No
te
s an
d I
n
de
x
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem
Cause/Solution
A
Battery inserted into the
camera cannot be charged.
•
Confirm all connections.
•
Off
is selected for
Charge by computer
in
the setup menu.
•
When charging by connecting the camera to
a computer, battery charging stops when the
camera is turned off.
•
When charging by connecting the camera to
a computer, battery charging stops when the
computer is suspended (sleeping), and the
camera may turn off.
•
Depending upon computer specifications,
settings, and status, it may be impossible to
charge the battery inserted into the camera
via computer connection.
–
Camera cannot be turned on
•
Battery is exhausted.
•
When connecting to an electrical outlet using
a Charging AC Adapter, the camera cannot be
turned on.
Camera turns off without
warning.
•
Battery is exhausted.
•
Camera has turned off automatically to save
power.
•
The camera and battery may not work
properly at low temperatures.
•
The camera turns off if the Charging AC
Adapter is connected while the camera is on.
•
The USB cable connecting the camera to the
computer or printer has been disconnected.
Reconnect the USB cable.
Monitor is blank.
•
Camera is off.
•
Standby mode for saving power: Press the
power switch, shutter-release button,
A
button,
c
button, or
b
(
e
movie-record)
button.
•
When flash lamp blinks red, wait until flash
has charged.
•
Camera and computer are connected via USB
cable.
•
Camera and TV are connected via audio/video
cable.
Summary of Contents for 26266
Page 193: ...181 Index Technical Notes and Index ...
Page 194: ...182 Index Technical Notes and Index ...
Page 195: ......
