17
Charging the Battery
First Ste
p
s
Turning On and Off the Camera
To turn on the camera, press the power switch.
The power-on lamp (green) will light, and then the
monitor will turn on (the power-on lamp turns off
when the monitor turns on).
To turn off the camera, press the power switch again.
When the camera is turned off, both the power-on lamp and monitor will turn off.
•
If the camera is turned off, hold down the
c
button to turn the camera on in
playback mode (
C
Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will blink. If no operations are performed for another three minutes,
the camera will turn off automatically.
•
To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:
- Power switch, shutter-release button,
A
button,
c
button or
b
(
e
movie-record) button.
•
In shooting or playback mode, the camera will enter standby mode in about one minute (default
setting).
•
The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off
option (
Summary of Contents for 26266
Page 193: ...181 Index Technical Notes and Index ...
Page 194: ...182 Index Technical Notes and Index ...
Page 195: ......