69
Setting Forced TTL and Forced A modes
(Applicable to all camera groups)
• Select Forced TTL mode when using the SB-27 as a slave
unit(s) in multiple flash operation. (See page 63.)
Please refer to “NOTE: Using the SB-27 as a slave flash
unit” on page 64.
• Select Forced A (non-TTL Auto Flash) mode when you
intentionally want easy exposure compensation with
cameras in Groups I thru VI.
Setting and canceling Forced TTL mode/Forced A mode
■
Forced TTL mode
1
Set the camera setting switch (inside the SB-27's battery
chamber) to
˚
.
2
Switch the flash mode selector from OFF to AUTO while
holding down the "ZOOM" button.
TTL
A
M
M
ZOOM
ISO
mm
f t
m
60
30
15
7
4
2
18
9
4
2
1
0.6
—The
t
indictor in the LCD panel blinks to indicate that the SB-27 is
in Forced TTL mode.
