Tech
ni
cal
Not
e
s
171
The battery
inserted in the
camera cannot be
charged.
•
Confirm all connections.
•
When connected to a computer, the camera may
not charge for any of the reasons described
below.
-
Off
is selected for
Charge by computer
in
the setup menu.
- Battery charging stops if the camera is turned
off.
- Battery charging is not possible if the camera’s
display language and date and time have not
been set, or the date and time were reset after
the camera’s clock battery was exhausted. Use
the Charging AC Adapter to charge the
battery.
- Battery charging may stop when the computer
enters sleep mode.
- Depending on the computer specifications,
settings, and status, battery charging may not
be possible.
–
–
–
The monitor is
hard to read.
•
Adjust the monitor brightness.
•
The monitor is dirty. Clean the monitor.
O
flashes on the
screen.
•
If the camera clock has not been set,
O
flashes
on the shooting screen, and images and movies
saved before the clock is set are dated “00/00/
0000 00:00” and “01/01/2015 00:00” respectively.
Set the correct time and date for
Time zone and
date
in the setup menu.
•
The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time
of the camera clock with that of a more accurate
timepiece, and reset as required.
Date and time of
recording are not
correct.
No indicators
displayed in
monitor.
Hide info
is selected for
Photo info
in
Monitor
settings
in the setup menu.
Date stamp
not
available.
Time zone and date
has not been set in the setup
menu.
Date not stamped
on images even
when
Date
stamp
is enabled.
•
The current shooting mode does not support
Date stamp
.
•
The date cannot be stamped on movies.
Problem
Cause/Solution
A
Summary of Contents for Coolpix AW130
Page 1: ...DIGITAL CAMERA Reference Manual En ...
Page 30: ...xxviii ...
