173
Changing the Projector Settings (Projector Settings Menu)
U
sin
g th
e pro
je
cto
r
k
Auto Off
If no operations are performed for a while during projection, camera ends
projection and enters standby mode (
21) for saving the power.
In this option, set the time allowed to elapse before the camera enters standby
mode.
30
s
,
1
min
,
5
min
(default setting), and
30
min
can be selected.
C
Canceling Standby Mode
•
When the camera enters standby mode from projector mode, press the power switch, shutter-
release button or
c
button to activate playback mode.
•
Press the
A
button to activate shooting mode.
•
To resume projection, press the
P
button again in playback mode or shooting mode.
C
Notes on Auto Off
The time allowed to pass before the camera enters standby mode is fixed as follows:
•
During slide show playback with the loop option enabled: 30 minutes
•
When a setting screen or the projector settings menu is displayed: three minutes
Tone Compensation
Dark portions of pictures are brightened when projected.
P
button (projector mode)
M
Tap the bottom tab
M
z
(Projector settings menu)
M
k
Auto off
P
button (projector mode)
M
Tap the bottom tab
M
z
(Projector settings menu)
M
Tone compensation
On (default setting)
Dark portions of pictures are brightened when projected. The results of tone
compensation vary depending on the picture.
Off
Tone compensation is disabled.