138
Techn
ic
a
l Not
e
s
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
Display, Settings and Power Supply
Problem
Cause/Solution
A
Monitor is blank.
•
Camera is off.
•
Battery is exhausted.
•
Standby mode for saving power: press the power
switch, the shutter-release button, the
A
button, or
the
c
button.
•
When flash lamp blinks red, wait until flash has charged.
•
Camera and computer are connected via USB cable.
•
Camera and TV are connected via AV cable.
•
Interval timer photography in progress.
Monitor is hard to read.
•
Adjust monitor brightness.
•
Monitor is dirty. Clean monitor.
Camera turns off without
warning.
•
Battery is low.
•
Camera has turned off automatically to save power.
•
Battery is cold.
Date and time of
recording are not correct.
•
Pictures recorded before clock has been set, and
“Date not set” indicator blinks during shooting, will
have time stamp of “00/00/0000 00:00”; movies and
voice recordings will be dated “01/01/2009 00:00.” In
calendar display or list by date mode, pictures are
recognized as having been taken on 01/01/2009. Set
the correct time and date from the
Date
option in
the setup menu.
•
Check camera clock regularly against more accurate
timepieces and reset as required.
No indicators displayed
in monitor.
Hide info
is selected for
Photo info
.
Select
Show info
.
Date imprint
not
available.
Camera clock has not been set.
Summary of Contents for COOLPIX S203
Page 163: ......