43
One-T
o
uc
h
Por
tra
it
Mode
The One-Touch Portrait Menu
Press
m
in one-touch portrait mode to display the one-touch portrait
menu. In addition to image mode, portrait effects (reducing vividness of skin
tones, softening overall image) can be set.
j
Face-Priority AF
• If no face is recognized when the shutter-release button is pressed halfway, the camera
focuses on the center of the frame.
• The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or other obstructions
- When the subject is not looking directly at the camera
- When faces take up too much or too little of the frame
• The camera’s ability to detect faces depends on a variety of factors, including whether or
not the subject is facing the camera.
• If the yellow double border blinks when the shutter-release button is pressed halfway, the
camera was unable to focus. Release the button and try again.
• In some rare cases shooting subjects with which autofocus may not perform as expected
25), the subject may not be in focus despite the fact that the double border glows
green. Should this occur, switch to
L
(auto) mode, refocus on another subject positioned
at the same distance from the camera as the actual portrait subject, and use focus lock
(
25).
k
Settings for One-Touch Portrait Mode
• Flash mode: Changeable
• Self-timer: Available
• Macro mode: Off
• Exposure compensation: Available
Z
Image mode
Choose an image size and quality (
B
Portrait effect
Choose from [Normal], [Brighter] (reduces vividness of skin tones), and [Softer]
(soft effect).
