80
Connecting to a Printer
Con
nec
ting to T
elevi
si
ons,
Com
puter
s, a
n
d
Pri
n
ters
Connecting the Camera and Printer
1
Turn off the camera.
2
Turn on the printer.
Check printer settings.
3
Connect the camera to the printer using the supplied audio
video/USB cable.
4
Turn on the camera.
When connected correctly, the PictBridge start-up
screen
1
will be displayed in the camera monitor.
Then the print selection screen will be displayed
2
.
j
Connecting the Audio Video/USB Cable
When connecting the audio video/USB cable, be sure that the connectors are oriented
correctly. Do not use force when connecting the audio video/USB cable. When disconnecting
the audio video/USB cable, do not pull the connector at an angle.
w
Print selection
15/11
2007
NO. 1
[ 57]
1
2