14
First Ste
ps
First Steps
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.
•
Charge the battery before first use or when the battery is running low (
1
Open the battery-chamber/memory card slot
cover.
Slide the cover latch toward
Y
(
1
) and open the
battery-chamber/memory card slot cover (
2
).
2
Insert the battery.
•
Confirm that the positive (+) and negative (–)
terminals are oriented correctly, as shown on the
label at the entrance of the battery chamber, and
insert the battery.
•
Use the edge of the battery to push the orange
battery latch in the direction indicated by the
arrow (
1
) and fully insert the battery (
2
). When
the battery is fully inserted, the battery latch will
lock it in place.
B
Inserting the Battery Correctly
Inserting the battery upside down or backwards
could damage the camera.
Be sure to check the
battery is in the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
•
Close the battery-chamber/memory card slot cover
(
1
), and slide the cover latch to the
Z
position (
2
).
Battery latch
