33
Shootin
g
Features
A
(Programmed auto)
Use for automatic control of the exposure by the
camera.
•
Different combinations of shutter speed and
aperture value can be selected without
changing the exposure by rotating the
command dial or multi selector (“flexible
program”). While flexible program is in effect, a
flexible program mark (
A
) is displayed next to the mode indicator (
A
) in the
upper left of the monitor.
•
To cancel flexible program, rotate the command dial or multi selector until
the flexible program mark (
A
) is no longer displayed. Selecting another
shooting mode, or turning off the camera, also cancels flexible program.
B
(Shutter-priority auto)
Use to shoot fast moving subjects at a fast shutter
speed, or use to emphasize the movements of a
moving subject at a slow shutter speed.
•
The shutter speed can be adjusted by rotating
the command dial or multi selector.
C
(Aperture-priority auto)
Use to bring subjects including both the
foreground and background into focus or blur the
subject’s background intentionally.
•
The aperture value can be adjusted by rotating
the command dial or multi selector.
D
(Manual)
Use to control the exposure according to shooting
requirements.
•
When adjusting the aperture value or shutter
speed, the degree of deviation from the
exposure value measured by the camera is
displayed in the exposure indicator of the
monitor. The degree of deviation in the
exposure indicator is displayed in EVs (–2 to
+2 EV in increments of 1/3 EV).
•
The shutter speed can be adjusted by rotating the command dial and the
aperture value can be adjusted by rotating the multi selector.
1/250
1/250
1/250
F3.7
F3.7
F3.7
880
880
25m 0s
25m 0s
1/250
1/250
1/250
F3.7
F3.7
F3.7
25m 0s
25m 0s
880
880
1/250
1/250
1/250
F3.7
F3.7
F3.7
25m 0s
25m 0s
880
880
1/250
1/250
1/250
F3.7
F3.7
F3.7
25m 0s
25m 0s
880
880
Exposure indicator
