E
93
Re
feren
ce
S
ect
io
n
Configure the Wi-Fi (wireless LAN) settings to connect the camera and a smart
device.
The Wi-Fi Options Menu
Press the
d
button
M
q
menu icon
M
k
button
Option
Description
Connect to smart
device
Select when wirelessly connecting the camera and a smart
device. See “Connecting to a Smart Device (Wi-Fi)” (
for more information.
Upload from camera
Select when wirelessly connecting the camera and a smart
device. See “Preselecting Images in the Camera That You
Want to Transfer to a Smart Device” (
52) for more
information.
•
The images to transfer can be selected on the image
selection screen before establishing a Wi-Fi connection
(
82). The SSID and password of the camera
are displayed on the screen after images are selected.
Disable Wi-Fi
Select to terminate the wireless connection between the
camera and a smart device. See “To Terminate the Wi-Fi
Connection” (
51) for more information.
Options
SSID
: Change the SSID. The SSID configured here is
displayed on the smart device. Set a 1- to 24-character
alphanumeric SSID.
Auth./encryp.
: Select whether or not to encrypt the
communications between the camera and the connected
smart device.
Communications are not encrypted when
Open
(default
setting) is selected.
•
When
WPA2-PSK-AES
is set, the message for entering
a password is displayed when the camera is connected
to smart device (
Password
: Set the password. Set an 8- to 16-character
alphanumeric password.
Channel
: Select the channel used for wireless
connections.
Subnet mask
: Use the default setting (
255.255.255.0
)
under normal conditions.
DHCP server IP address
: Use the default setting
(
192.168.0.10
) under normal conditions.