Nikon D7100 User Manual Download

Page: 201 / 384

173

Editing Movies

Trim footage to create edited copies of movies or save selected frames as JPEG stills.

Trimming Movies

To create trimmed copies of movies:

Display a movie full frame.

Press the

button to display pictures full

frame in the monitor and press

and

scroll through pictures until the movie you
wish to edit is displayed.

Choose a starting or end point.

Play the movie back as described on page
171, pressing

to start and resume

playback and

to pause and pressing

or rotating the main or sub-command

dials to locate the desired frame (

171).

Your approximate position in the movie can
be ascertained from the movie progress bar.

Display movie edit options.

Press the

button to display movie edit

options.

Option

Description

Choose start/end point

Create a copy from which the opening or closing footage has been
removed.

Save selected frame

Save a selected frame as a JPEG still.

button

Movie progress bar

button

Summary of Contents for D7100

































































































































































































































































































































































































Search results

Summary of Contents for D7100

Reviews:

Related manuals for D7100

Brands by name

Popular brands

Nikon D7100, User Manual

Search results

Summary of Contents for D7100

Reviews:

Related manuals for D7100

Brands by name

Popular brands