Nikon D7100 User Manual Download

Page: 103 / 384

Focus Point Selection

The camera offers a choice of 51 focus points that can be used to compose
photographs with the main subject positioned almost anywhere in the frame.

Rotate the focus selector lock to

●

This allows the multi selector to be used to select
the focus point.

Select the focus point.

Use the multi selector to select the focus point in
the viewfinder while the exposure meters are on.
Press

to select the center focus point.

The focus selector lock can be rotated to the
locked (

) position following selection to prevent

the selected focus point from changing when
the multi selector is pressed.

Auto-area AF

The focus point for auto-area AF is selected automatically; manual focus-point selection is
not available.

See Also

For information on choosing when the focus point is illuminated, see Custom Setting a4 (

point illumination

232).

For information on setting focus-point selection to “wrap

around,” see Custom Setting a5 (

Focus point wrap-around

232).

For information on

choosing the number of focus points that can be selected using the multi selector, see
Custom Setting a6 (

Number of focus points

233).

For information on changing the role

of the

button, see Custom Setting f1 (

OK button

252).

Focus selector lock

Summary of Contents for D7100

































































































































































































































































































































































































Search results

Summary of Contents for D7100

Reviews:

Related manuals for D7100

Brands by name

Popular brands

Nikon D7100, User Manual

Search results

Summary of Contents for D7100

Reviews:

Related manuals for D7100

Brands by name

Popular brands