4
Select the flash mode.
—Press the
µ
button until
t
appears on the LCD panel.
• Set your camera to the Matrix
Balanced Fill Flash or Center-
Weighted Fill-Flash/Spot Fill-Flash
mode.
5
Check the shooting distance.
A flash shooting distance range
of 0.8 to 6m (2.6 to 20 ft) is shown.
Nikkor lenses with a built-in CPU
• In any exposure mode:
—Press the
{
or
}
button until the same aperture as displayed on the
camera’s LCD panel or in viewfinder is set on the SB-28’s LCD panel, then
confirm the flash shooting distance range.
Nikkor lenses without a built-in CPU
• In Aperture-priority auto (A) or Manual (M) mode only:
—Press the
{
or
}
button until the same aperture on the lens is set on the
SB-28’s LCD panel, then confirm the flash shooting distance range.
6
Wait for the ready-light to come on and make sure the subject
is in focus before taking the picture.
• If the ready-light blinks for approx. 3
seconds after shooting, this indicates
the light may have been insufficient
for correct exposure. In this case,
use a wider aperture or move closer
to the subject.
34
TTL Auto Flash
t
t
Mode
Flash settings
For cameras in Group III: F-601/N6006, F-601
M
/N6000
Summary of Contents for FSA02911 - SB 28 - Hot-shoe clip-on Flash
Page 1: ...Instruction Manual E SB 28 Autofocus Speedlight En ...
Page 44: ...44 ...
