background image

correct usage accompanying the product. Keep this manual within reach for easy 
reference. 
 

 !    WARNING 

This indication alerts you to the fact that any improper use ignoring the contents 
described herein can result in potential death or serious injury. 
 

 !    CAUTION 

This indication alerts you to the fact that any improper use ignoring the contents 
described herein can result in potential injury or material loss. 
 

SAFETY AND OPERATION PRECAUTIONS 
 !    Warning 

 

Never look directly at the laser beam or directly at the sun when using the 
Nikon Laser IRT. 

 

Do not depress the POWER button while aiming with the eye or looking into 
the optics from the objective side. 

 

Do not operate the unit with other additional optical elements, such as lenses 
or binoculars. Using an optical instrument together with the Nikon Laser IRT 
increases the danger of damaging the eyes. 

 

Do not disassemble the Nikon Laser IRT. A product that has been 
disassembled is not guaranteed by the manufacturer. 

 

If the Laser IRT’s body cover is damaged, or if it emits a strange sound due 
to dropping or for some other cause, immediately remove the battery and 
stop using. 

 

 !   Cautions 

 

When not using the Nikon Laser IRT, do not push the POWER button. 

 

Do not leave the Nikon Laser IRT within reach of small children. 

 

Rain, water, sand or mud should be removed from the Laser IRT body 
surface as soon as possible, using a soft, clean, dry cloth. 

 

Although the Nikon Laser IRT is waterproof, it is not designed for use 
underwater. 

 

Do not leave the Nikon Laser IRT in an unstable place, as it may fail and 
cause injury, or damage the equipment. 

 

Do not look through the Nikon Laser IRT while walking. You may walk into 
something and get hurt. 

 

Do not leave the Nikon Laser IRT in a car on a hot or sunny day, or near 
heat-generating equipment. This may damage or negatively affect it. 

Summary of Contents for Laser IRT 4-12X42
















Reviews: