34
Nikon
Film Scanner LS-4500AF User's Manual
6.4
Using the FH-356 for Strip Film
When scanning a 35mm strip film, the FH-356 can be used.
•
The maximum size of the strip film that can be scanned is six frames.
•
The maximum number of strip films that can be scanned is three.
•
The number of screens that can be scanned at one time is 4 frames x 3;
that is, 12 images.
•
If set in the film housing at the center part of the holder, scanning can
be performed at 3,000dpi.
•
The scanning area is decided by holding down the sections outside the
image. If there is any problem with flatness, use of the FH-45 is
recommended, with the film separated into individual frames.
Step 1
The small folding handle will be raised when it is slid; at this point, lift it
up. Grasp the handle and pull it toward you; the cover will be disengaged
from the catch section of the frame, at which point the cover can be
opened. The cover will be held firmly in place while it is open.
Folding Handle
6. Using the Film Holder
