32
Updating the Device Driver (Windows XP)
If the scanner is not listed under “Imaging devices” in the Device Manager or the message
“This device is working properly” does not appear in the Properties dialog, you will need to
reinstall the device driver as detailed below.
1
Open the scanner Properties dialog
Display the Device Manager as described in steps 1–3 of “Confirming Device Registration
(Windows XP)” (
30). If the scanner is listed under “Other devices” or appears next to
a “!”, “?”, or “
×
”, double-click the entry for the scanner to display the scanner Properties
dialog.
2
Click
Reinstall Driver…
Open the General tab and click
Reinstall
Driver…
.
3
Insert the Nikon Scan 3 CD
The dialog shown at right will be dis-
played. Holding down the shift key to
prevent the Welcome program from start-
ing automatically, insert the Nikon Scan
3 CD into the CD-ROM drive. Select the
automatic install option and click
Next
.
The Welcome Window
If the Welcome program starts automati-
cally when you insert the Nikon Scan CD,
click
Exit
to close the Welcome window.
