18
E
2
Make sure the blinking
“
0
” is visible on the
LCD panel.
•When the film is completely rewound,
“
0
” blinks and the camera turns
off. The cartridge chamber cover lock
mechanism is released.
•If film rewind stops midway through the
roll due to a dead battery, it resumes
automatically as soon as the battery is
replaced.
3
Open the cartridge chamber
cover and remove the film.
•You cannot turn the camera on unless
the rewound film cartridge is removed.
•When opening the cartridge chamber
cover, make sure that the camera bottom
faces up, or the cartridge may fall out.
Do not open the cartridge chamber
cover until “
0
” starts blinking.
Removing the film
1
The film starts rewinding
automatically.
•At the end of the film roll, the film
rewinds automatically.
•While the film is rewinding, the frame
counter counts down one by one.
•If you want to remove the film while the
number of available frames still appears
on the LCD panel, rewind the film
midway through the roll. (
-
P. 19)
