P-400R Digital Microscope Instructions
29
4
Basic Operations for Capturing an
d Playing Back
(2)
Adjusting brightness of the illumination
Adjust brightness of the illumination as described below.
1
Press ([+]/[-]) of the light control button
(
) to adjust brightness.
When you press the light control button,
the [Light value] menu is displayed. In this
menu, the current brightness level (ten
levels) is displayed. Adjust the light while
checking the brightness of the live image.
1 to 10 (ten levels)
If the light control button is pressed and
held for more than one second, the
brightness is adjusted consecutively at a
0.2 sec. interval.
While the menu is displayed, if you press
the [OK] (or right) button or no operation is
performed for two seconds, the setting is
applied and the ordinary display is
restored.
[Light value] menu
About settings at the power-on time
The setting of brightness is saved when the power is turned off. The saved
brightness will be applied the next time the power is turned on.
LCD panel
Light control button