P-400R Digital Microscope Instructions
33
4
Basic Operations for Capturing an
d Playing Back
About settings at the power-on time
The selection of scene mode is saved when the power is turned off. Next time the
power is turned on, the previously selected scene mode is selected again.
About changing the scene mode setting
After a scene mode is selected, you can change settings such as the
exposure mode, exposure compensation, camera gain, and shutter speed.
However, those changes cannot be saved in the scene mode.
To save the shooting conditions, use “custom setting”. For details about how
to use custom settings, see “4.3.7 Using custom settings”, and for registration,
see “5.1 Registering a Custom Definition”.
About flickering during observation
Flickering may occur in the live image depending on the object to be observed.
(This is noticeable in a color chart which has an even color.)
Change the exposure mode to Manual and make the shutter speed slower.
Make the illumination brighter.
If the shutter speed is too slow or the illumination is too bright, overexposure
occurs. Adjust them while checking them in the live image to obtain appropriate
exposure.
