background image

125

124

Chapter 

4

Close-Up Flash Photography in TTL Auto Flash Mode — To Flash On        A Very Close Subject

Optional TTL Remote Cord SC-17 or SC-24 lets you perform
TTL Auto Flash shooting on a subject closer than 0.6m (2 ft.).

Hints and Notes

• Connect the SB-25 to the camera, using the SC-17 or

SC-24*.

* Used for F4-Series with the DW-20 or DW-21 attached.

• Position the SB-25 so light from the head covers the sub-

ject.

• Mount the built-in flash adapter.

The zoom-head position is automatically adjusted.
Confirm the LCD panel shows 

with 

indica-

tion.

• Use aperture-priority auto or manual exposure mode.

• Choose 

position (flash mode selector) for TTL Auto

Flash operation.
For further instruction, see the 

TTL Auto Flash Mode

section relating to your camera type.

• Determine the aperture or f/stop value using the following

equation and chart, then set on the lens. The SB-25’s LCD
panel cannot be used to compute shooting distance.

[f/stop] 

[coefficient]

[flash-to-subject distance]

For example, to shoot a subject located 0.5 m away with
an ISO 100 film and a wide-flash adapter:

[f/stop] 

4

= 8

0.5

You can then use an aperture of f/8 or smaller (a larger f-
number). As far as conditions allow, you should choose
the smallest aperture (as large an f-number) possible.

• With a very light- or dark-toned subject, take additional

shots with other exposure compensation conditions to
ensure a correct exposure.
See  “Flash Exposure Compensation” on pages 106 and
107, and “Exposure Compensation with Camera’s Dial” on
pages 108 and 109.

ISO film speed

100 or lower

125 — 400

500 or higher

Coefficient*

4 (14)

8 (26)

11 (36)

* Numbers in parentheses (  ) represents coefficients for foot measurement

system.

ISO film Speed and coefficient

F90-Series/N90

F-501/N2020

Nikonos V

F4-Series

F-301/N2000

F3-Series

F-801/N8008

F-401/N4004

F2-Series

F-801s/N8008s

F-401s/N4004s

FM2

F-601

M

/N6000

FE2

F-401x/N5005

FG

F-601/N6006

FA

FG-20

APPLICABLE NIKON SLR MODELS

SB-25_En  03.1.14 8:18 PM  Page 124

Summary of Contents for SB-25










































































Reviews: