background image

H

–15

H

Tips on Speedlight Care and Reference Information

Specifications

Flash compensation

3.0 EV to +3.0 EV in increments of 1/3 EV steps 

in i-TTL, auto aperture 

fl

 ash, non-TTL auto 

fl

 ash or 

distance-priority manual 

fl

 ash mode

Custom settings

19 items

Other functions

ISO sensitivity manual setting, redisplay of 
underexposure amount from insuf

fi

 cient 

fl

 ash output 

in i-TTL mode, reset to the default settings, key lock, 
thermal cut-out, 

fi

 rmware update

Dimensions (W × H × D)

Approx. 78.5 × 145 × 113 mm (3.1 × 5.7 × 4.4 in.)

Weight

Approx. 510 g (18 oz) (with four 1.5 V LR6 (AA-size)
alkaline batteries)
Approx. 420 g (14.8 oz) (Speedlight only)

Accessories supplied

Speedlight Stand AS-21, Nikon Diffusion Dome 
SW-13H, Fluorescent Filter SZ-2FL, Incandescent Filter 
SZ-2TN, Soft Case SS-910

These performance specifications are applicable when fresh batteries are used at normal 

• 

temperatures (20 °C/68 °F).
Specifications and design are subject to change without any notice.

• 

Products and brand names are trademarks or registered trademarks of their respective 

• 

companies.

  Effective flash output distance range (for i-TTL 

mode, auto aperture flash mode, non-TTL auto flash 
mode)

The effective 

fl

 ash output distance range of the SB-910 is between 0.6 m and 20 m 

(2 ft and 66 ft). The effective 

fl

 ash output distance range differs depending on the 

camera’s image area, illumination pattern, ISO sensitivity, zoom head position and 
aperture.

The following table is for FX format and standard illumination pattern. 

• 

The effective flash output distance range for each setting can be seen on the LCD 

• 

panel.

Summary of Contents for SB-910









































































































































Reviews: