background image

13

Applications for the WR-R11a/WR-R11b and WR-T10

Synchronized Release with the WR-R11a/
WR-R11b

Wireless connections can be established 
between WR-R11a/WR-R11b controllers 
mounted on multiple cameras. Releasing 
the shutter on any of the cameras to 
which the interconnected WR-R11a/
WR-R11b controllers is attached 
synchronously releases the shutters on the remaining cameras. 
Wireless connections can be established between WR-R11a/
WR-R11b controllers via pairing or using a PIN.

A

Master and Remote

The camera that transmits a release signal when the shutter-release 
button is pressed is referred to as the “master” camera, while the 
cameras that release their shutters in response are referred to as 
“remote” cameras.

The cameras that can function in the role of master are the D780, 
mirrorless cameras, and cameras compatible with the WR-R11a. Other 
cameras can serve as remote cameras.

Method

Description

Pairing

Simply press the pairing buttons on two controllers 
simultaneously to establish a connection (

0

14). No 

complicated settings are required.

PIN

Connections can be established between controllers with 
identical four-digit PINs (

0

16). Connections will 

automatically be established between devices with the 
same PIN, making this a good choice for photography 
featuring a large number of remote devices.

Summary of Contents for WR-T10





























































Reviews: