29
Using the WR-R11a/WR-R11b with Other Devices
11
Confirm that pairing is complete.
•
If pairing succeeds, the LINK
indicator on the flash unit will blink
green and orange. The LEDs on the
WR-R11a/WR-R11b will blink
alternately red and green.
•
Pairing is complete when the green
LED on the WR-R11a/WR-R11b
lights, the flash unit LINK indicator
turns green, and the flash unit
displays the message “PAIRING
COMPLETE”.
•
You will not need to perform pairing again when
connecting the devices in future.
•
If pairing fails, for example because
you waited too long between
pressing the buttons on the flash
unit and WR-R11a/WR-R11b, the
flash unit will display the message
“NO RESPONSE”. Repeat the pairing
process from Step 9.
Summary of Contents for WR-T10
Page 59: ......