355
On-Camera Flash Photography
This feature is used to lock flash output, allowing photographs to
be recomposed without changing the flash level and ensuring
that flash output is appropriate to the subject even when the
subject is not positioned in the center of the frame. Flash output
is adjusted automatically for any changes in ISO sensitivity and
aperture. FV lock is not available in
b
mode.
To use FV lock:
1
Assign
FV lock
to a camera control.
Assign
FV lock
to a control using
Custom Setting f2 (
Custom control
assignment
).
2
Attach a CLS-compatible flash unit.
Mount a CLS-compatible flash unit on the camera accessory
shoe.
3
Set the flash unit to the appropriate mode.
Turn the flash unit on and select
TTL
or
Auto external flash
for
Flash control
>
Flash control mode
(SB-5000, SB-500,
SB-400, or SB-300) or set the flash control mode to TTL,
monitor pre-flash
q
A
, or monitor pre-flash A (other flash
units; see the documentation provided with the flash unit for
details).
FV Lock
Summary of Contents for Z 6
Page 495: ......
