background image

ABOUT NIKRANS BRAND

Nikrans boosters is the result of a 7-year experience in selling cell phone signal amplifiers throughout EMEA, APAC, NAR and other

regions. For all these years we’ve been following the market carefully listening to customers and industry leading experts with the
aim of working up our own vision and quality standards in signal amplification.

Nikrans product line includes about 40 models: from basic single-band devices with 100 m

2

coverage to high-end all-in-one

solutions covering up to 5000 m

2

. Depending on the model, boosters operate in GSM, DCS, CDMA, LTE or combination of these

standards at 850-2100 MHz frequencies. The product line is extended with a series of antennas, splitters and other accessories for
completing exclusive custom projects of any difficulty level.

Nikrans product development process is rigorously assessed to comply with ISO 9001:2008 standard and implicates internal tests,
which greatly ensures the quality of our goods. High product quality is also confirmed by Phoenix Testlab, Germany and is proved
with CE and RoHS certificates. That’s why a 3-year warranty applies to any of Nikrans boosters.

Certificates

Summary of Contents for NS-500GD






















Reviews: