background image

OPERATING & SAFETY INSTRUCTIONS

Electrical Specification

This machine is designed to operate on a 15 amp. 115V., 60 hz., AC circuit. A deviance of this could 
cause serious damage to the unit. 

Grounding Instructions 

This machine is equipped with a grounding type cord and three
prong plug. Make sure that the plug is connected to an outlet with
three receptacles designed for use with the three prong plug. (See
Illustration) Never use an adapter with machine. 

Maintenance 

Lubrication of this motor is not required as it is equipped with sealed bearings. 

Always keep the air cooling intake screen free, not allowing any restriction of airflow. Airflow restriction 
will overheat and damage the motor. 

SAFETY INSTRUCTIONS

Read all safety instructions before using!

1.

Electrical shock could occur if used outdoors or on wet surfaces. 

2.

Always store machine indoors in a dry area. If machine is dropped in water or left in rain, it 
should be serviced by an authorized service technician prior to plugging the unit in. 

3.

Prior to plugging in machine, always inspect cord for cuts and exposed wires. If these problems 
are found, return the machine to an authorized service technician.. 

4.

Never use the cord as a handle, or pull the machine by using the cord. 

5.

Never unplug this machine or any other electrical appliance by pulling on the cord. 

6.

Do not wrap the cord around the dome. Wrapping the cord around the dome will restrict the 
motor from exhausting properly and will result in overheating and damaging the motor. 

7.

Keep hair, fingers, and other objects away from all moving parts and openings on this machine. 

8.

This vacuum cleaner should never be used in explosion-hazardous areas or to pick up 
combustible or flammable liquids such as gasoline, etc. 

9.

Never leave the machine unattended when plugged in or running. 

10.

Always have the switch in the OFF position before unplugging the unit. 

11.

Do not operate this machine with any of the openings blocked; always keep these areas free of 
lint and dust or any other particles that could reduce the airflow. 

12.

Never operate or plug in this machine or any other electrical appliance with wet hands or when 
standing in water. 

13.

This machine should never be operated without the proper filters installed in the manner 
described in the following pages of this manual. 

14.

This machine should never be serviced by anyone other than an authorized technician.

15.

Use only original NIKRO replacement parts and attachments.

Summary of Contents for WC20110









Reviews: